Pit Fillers are a custom trailer wheel riser that is built to elimiate trailer height changes caused by sloped driveways. When loading docks are dug out next to a building, they need a drain which is typicallly located several feet from the building. This causes the trailers bed height to come in lower than on a level dock approach.

To solve this problem, we build a long platform that creates a level surface for the trailer tires and brings the trailer bed at or above dock, regardless of the trailer axles position.

		•	Raise all trailers above dock regardless of axle position
		•	Maintain drainage for dock
		•	15' platforms for all axle dimensions

Improve Safety
Match trailer bed heights to loading dock floor for smooth operation regardless of trailer axle positions. Robust Steel Construction Designed per AASHTO HS 20-44 maximum axle loads for 60,000 lb capacity per set.

Reduce Product Damage
Unloading trailers at or above dock eliminates
interference from bumpers and building floor. Optional Wheel Guides Center trailer at dock with high strength pipe guides, available
upon request.

Standard Sizes
Heights: 2" to 30"
Deck Lengths: 15' Standard
Ramp Lengths: As needed
Widths: 24"and 36"

All wheel risers are painted safety yellow to assist
drivers in backing onto ramps.

Custom designs available.

Applications engineering is available to customize
the product to any operation.