Wheel Risers create a bridge for semi-trailers to use that can match your loading docks
specifically to your operations. Preferred loading and unloading is when the trailer bed is 2”
to 3” above the building floor, which can easily be achieved even with necessary drainage
outside a building. The bridge design of the Field Adjustable Risers allows water to flow freely
underneath the structure while allowing the trailers to be serviced at a safe level. If the height
of the risers needs to change due to relocation or other factors, simply remove the dock
anchors and change the leg heights.
| • |
Improve Safety
Match trailer bed heights
to loading dock floor for
smooth operation regardless
of trailer axle positions. |
• |
Robust Steel Construction
Designed per AASHTO
HS 20-44 maximum axle
loads for 60,000 lb capacity
per set. |
| • |
Reduce Product Damage
Unloading trailers at or
above dock eliminates
interference from bumpers
and building floor. |
• |
Optional Wheel Guides
Center trailer at dock with
high strength pipe guides,
available upon request. |
| • |
Maximum Flexibility
Unique support design
allows the height to be
adjusted before or after
installation. Decks easily
span over drains allowing
access and maintenance. |
• |
Standard Sizes
Heights: 2” to 20”
Deck Lengths: 8’ and 15’
Ramp Lengths: 5’, 10’, 15’
Widths: 24”and 36” |
| • |
High Visibility
All wheel risers are
painted safety yellow to
assist drivers in backing
onto ramps. |
• |
Custom Designs Available
Applications engineering is
available to customize the
product to any operation. |
